EV Charger Installation
Level 2 EV charger installation for your home or business. Fast, safe, code-compliant wiring by a licensed Baldwin County electrician.
- EV charger installation
- Level 2 EVSE installation
- Electric vehicle charging station
- Home EV charging
A Level 2 home charger is the difference between rolling out of the driveway every morning with a full battery and babysitting a regular outlet for two days to get the same charge. Wave Electric installs Level 2 EV chargers across Baldwin County, Tesla Wall Connectors, ChargePoint, Wallbox, Grizzl-E, JuiceBox, whatever you’ve picked, and handles the 240V circuit, the panel work, and the permitting that goes with it. Jimmy’s licensed and insured, and the install is done to current NEC standards so it passes inspection and stays safe for the life of the car.
EV adoption around Fairhope, Daphne, and Spanish Fort has picked up fast over the last few years. A lot of those homes were never wired with a Level 2 install in mind, which is why the first thing Wave Electric does on every EV job is check the panel.
When you need this
- You just bought an EV and the included mobile charger isn’t keeping up
- You’re charging on a standard 120V outlet and it’s taking 30+ hours to top off
- You’re building a new home or remodeling a garage and want the wiring done now
- You want an outdoor-rated 240V receptacle for a portable Level 2 or a future charger
- You manage a short-term rental or commercial property and need to add EV charging for guests or employees
What the process looks like
Jimmy starts with a free quote visit. He looks at your panel, measures the run from the panel to where the charger will mount, checks whether you’ll need an outdoor-rated receptacle or a hardwired install, and confirms there’s enough capacity in the panel for a new 40 or 50-amp circuit. If the panel’s already full or undersized, he’ll tell you straight, sometimes a small load calculation gets you home free, and sometimes a panel upgrade is part of the job.
You’ll get a written quote covering the charger install, any panel work, the permit, and labor. Most home installs are done in a half day. Jimmy runs the circuit, mounts the charger, terminates everything cleanly, tests the unit, and walks you through the app setup if your charger has one. The inspector signs off and you’re charging at full speed that night.
For commercial EV installations, apartment buildings, hotels, office parking, Wave Electric scopes the load calculation, the conduit runs, and the panel capacity from your home to your business, and coordinates with the property owner or GC on timing.
It’s a clean install, code-compliant, done right the first time.
Estimates are free and quoted per job, call 251-656-4601 and Jimmy will walk the work with you.
From your first text to a signed-off job.
Most homeowners get from "I called Jimmy" to "I have power back" inside of a week. Bigger jobs follow the same flow, just longer.
Call or text Jimmy
You'll talk to Jimmy, not a call center. Tell him what's going on; he'll ask the right questions.
Walk-through & quote
Most jobs get a same-day written quote. Bigger ones get a 30-minute on-site visit first, no charge.
Permits & schedule
Jimmy pulls the permit, books the inspector, and texts you a time you can plan around.
Work & sign-off
Job done, inspected, breakers labeled, floor swept. One-year workmanship warranty.
Need something more specific?
Heads-up, if your job spans two categories, just call. Jimmy will sort out which page you're on.
What homeowners ask first.
Don't see what you're looking for? Text Jimmy at 251-656-4601, same-day reply.
A Level 2 charger runs on 240V and can fully charge most electric vehicles overnight, compared to a standard outlet that may take days. If you drive an EV daily, a Level 2 charger installed by a licensed electrician is the right choice for your home or business.
EV charger installation requires a licensed electrician familiar with 240V circuits and local permitting requirements. Wave Electric is licensed and insured in Baldwin County and handles the full installation including any panel work needed to support the new circuit.
It depends on the distance from your electrical panel, whether a permit is required, and if any panel upgrades are needed. Jimmy provides a free quote before starting.
Not always. Jimmy will inspect your existing panel to determine if it can handle the additional 40–50 amp circuit. If an upgrade is needed, he'll let you know the total cost upfront.
Most residential EV charger installations are completed in 2–4 hours. If additional panel work is required, it may take a full day.
Jimmy handles ev charger installation across 9 Baldwin County communities. Pick yours to see the local details, permitting, and recent work:
Got a residential project? Same number, same Jimmy.
One licensed electrician, on the Gulf coast since 2015. Tell Jimmy what's going on and you'll get a callback the same day.