Electrical Installation Services in Baldwin County, AL
Wave Electric handles electrical installation across Baldwin County, Alabama. Jimmy Palmer is a licensed Alabama electrician (#02617) who installs panels, subpanels, generators, EV chargers, pool wiring, and full rewires in Fairhope, Daphne, Spanish Fort, Foley, Gulf Shores, and the surrounding coastal communities.
What counts as electrical installation
Installation work is anything that adds to or changes the wiring in your home or building, a new circuit, a new panel, a new piece of equipment that needs power, or a full rewire. It sits apart from service and repair, which is fixing what's already there. Installation almost always needs a permit, an inspection, and an electrician who's licensed to sign for the work. In Baldwin County that means a state-licensed electrician pulling the permit through the local jurisdiction handling your property.
Why licensing actually matters here
Alabama takes electrical licensing seriously, and so do the insurance companies. If unlicensed installation work causes a fire or a shock injury on your property, your homeowner's policy can deny the claim. Bank inspections on a home sale flag panels and wiring that were altered without a permit. And the practical safety piece is real: a licensed electrician has to know the current code, the load calculations, and the grounding and bonding rules that keep a modern electrical system safe. That's what license #02617 buys you.
Permits and inspections in Baldwin County
Most installation work in Baldwin County needs a permit through the city (Fairhope, Daphne, Foley, Gulf Shores, Orange Beach, Robertsdale, Bay Minette, Loxley, Spanish Fort) or through the county building department for unincorporated areas. Panel changes, service upgrades, new circuits for hot tubs and pools, generator hookups, and EV chargers all fall into this bucket. Jimmy handles the permit paperwork and coordinates the inspection so you don't have to chase anyone.
What planning ahead saves you
The most common installation mistake is bolt-on thinking. Someone adds an EV charger without checking if the panel has capacity. Someone puts in a pool without pulling the equipment on a properly sized subpanel. Someone drops a generator in without planning the transfer switch location. Each one works on day one, and each one becomes an expensive fix later. On any installation job, Wave Electric looks at the whole picture, the existing service, the panel's spare capacity, the loads you're planning to add over the next few years, and quotes work that fits the whole plan, not just the piece in front of you. Free quotes, priced up front, done right the first time.
Eleven ways Jimmy handles installation.
Every installation gets a load calculation, a permit, and an inspection Jimmy schedules himself.
Panel Upgrades
If your panel is a Federal Pacific, a Zinsco, a Challenger, or just full of double-tapped breakers, it's time. Wave Electric replaces residential and commercial panels with current-code equipment sized for the loads your building actually pulls today, EV chargers, heat pumps, home offices, the works. Jimmy handles the utility coordination, the permit, and the inspection.
Read more about panel upgrades →Subpanel Installation
Adding a workshop, a pool, a mother-in-law suite, or a detached garage almost always calls for a subpanel. Wave Electric sizes the feeder correctly, runs it in proper conduit, and installs the subpanel with dedicated grounding and bonding so the new circuits are safe and inspection-ready. Jimmy will spec the panel for what you're adding today and what's realistic to add later.
Read more about subpanel installation →Whole-Home Rewiring
Older homes across Baldwin County still have knob-and-tube, cloth-insulated wire, or aluminum branch circuits that no modern insurance company loves. Wave Electric handles full rewires with as little demo as possible: fishing new wire through existing walls, adding grounded outlets, updating switches, and finishing with a panel that matches the new capacity. Jimmy walks you through the phasing so you're never fully without power.
Read more about whole-home rewiring →Generator & Transfer Switch
Hurricane season is the reminder every year. Wave Electric installs standby generators and manual or automatic transfer switches sized to keep the circuits you actually need running when the grid goes down. Jimmy handles the gas coordination, the pad, the transfer switch, and the panel work, then commissions the system so you know it will start when you need it.
Read more about generator & transfer switch →EV Charger Installation
A Level 2 EV charger pulls serious current, and dropping one on a panel without checking capacity is how breakers start tripping and warranties get voided. Wave Electric quotes EV charger installs the right way: load calculation first, then the dedicated circuit, then the charger mounted where you actually want it. Tesla, ChargePoint, Wallbox, or a NEMA 14-50 outlet, Jimmy will install it clean.
Read more about ev charger installation →Surge Protection & Smart Home
Coastal Alabama gets hit with lightning and grid surges that will fry expensive electronics in a hurry. Wave Electric installs whole-home surge protection at the panel and point-of-use protection at sensitive equipment. If you're building out smart lighting, smart switches, or a smart panel, Jimmy handles the wiring and the integration so everything comes online working the way you expect.
Read more about surge protection & smart home →GFCI Outlets & Switches
Missing GFCI protection in kitchens, bathrooms, laundry rooms, garages, and outdoor outlets is one of the most common things Wave Electric finds on older Baldwin County homes. Jimmy installs and replaces GFCI outlets, AFCI breakers, and standard switches to current code, plus dimmers and smart switches when you're ready to upgrade. Small job, big safety difference.
Read more about gfci outlets & switches →Pool & Hot Tub Wiring
Pool and hot tub circuits have their own code section for good reason: water and electricity don't forgive shortcuts. Wave Electric wires pool pumps, heaters, lights, and hot tub disconnects with the required bonding, GFCI protection, and permit sign-off. Whether you're building new or updating an older pool that never had the right bonding grid, Jimmy will get it inspection-ready.
Read more about pool & hot tub wiring →Smoke Detectors & Safety
Hardwired, interconnected smoke and CO detectors are code in most Baldwin County homes, and they save lives in a way battery-only units don't. Wave Electric installs and replaces hardwired detectors with battery backup, wires them to the required interconnect, and pairs them with AFCI and GFCI protection where the code calls for it. Jimmy will walk your house and flag anything that's out of date.
Read more about smoke detectors & safety →AC & Equipment Wiring
New HVAC, mini-splits, well pumps, water heaters, and commercial equipment all need dedicated circuits, correct wire sizing, and proper disconnects. Wave Electric handles the electrical side of equipment installs, the whip, the disconnect, the breaker, the load calc, so your HVAC contractor or equipment installer can drop in and start their work. Residential and commercial, Jimmy has it wired.
Read more about ac & equipment wiring →Grounding & Bonding
Grounding and bonding are the invisible work that keeps everything else safe. A missing ground rod, a broken bonding jumper on a water line, or a service that was never bonded correctly can turn a normal fault into a shock hazard or an equipment killer. Wave Electric inspects and corrects grounding and bonding on homes, docks, pools, and commercial services across Baldwin County.
Read more about grounding & bonding →Get the install done right
Every Wave Electric quote is free, priced up front, and comes from the licensed electrician who's going to do the work. Jimmy answers the phone, walks the job, and stands behind every install.